Now, the piston automatic filling machine occupies an important position in the packaging processing industry, and it is playing an increasingly important role in life. Filling machine is one of the important equipment for enterprises such as cosmetics, pharmaceuticals, beverages, food, etc. to speed up the efficiency of production, processing and packaging. For enterprises, the use of piston automatic filling machine is not a problem, but it is not necessarily clear about its maintenance and maintenance, so here is a brief overview.

　　Rinsing, brushing, and piston automatic filling machines should:

　　1. After the installation is completed, commissioning will be carried out, but before commissioning, please prepare the commissioning tools and read the instructions in detail.

　　2. After the installation and commissioning of the bottle rinsing machine, bottle brushing machine, and piston automatic filling machine, they must be connected to the transfer track, and the track and bottle receiving tray must be as level as possible, and then they can be put into the storage box. materials, and then make sure that all electrical switches are turned off.

　　3. In order to prevent potential safety hazards such as electrical leakage from the casing, the power socket must be a three-pin special socket to ensure that the grounding wire is intact. Turn the power switch of the machine to ON, connect the external power supply, and the power indicator light will light up.

　　Maintenance After the piston automatic filling machine is used, it is necessary to pay attention to it. When it is not working, it should be powered off. During the maintenance of the piston automatic filling machine, try to fix the piston when it is removed and washed, and remove the upper and lower fixing screws at the same time. , Avoid affecting another part when disassembling and washing one part. Before starting to clean the piston automatic filling machine, try to clean up the materials remaining in the piston automatic filling machine. After cleaning the material barrel, clean it with a soft cleaning solution. The cylinder has been lubricated before leaving the factory, please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic, and power off when it is not working. In addition, while insisting on maintaining and using the filling machine correctly, it is also necessary to carry out regular testing and debugging. Only in this way can the filling machine work healthily and stably.