What impact will the improper operation of the automatic filling machine equipment have on the machinery? The filling machine equipment must be operated according to the instructions. If the operation is improper, it will have a great impact on the filling machine equipment and the manufacturer.

　　Improper operation of filling machine equipment will have three major impacts on the machine:

　　1. Improper cleaning of the filling machine will accelerate the aging of the filling machine equipment

　　The filling machine manufacturer pointed out that when disassembling and washing the filling machine equipment, do not wash it directly with water. If you use water pipes, water guns and other instruments to wash the machine, if the water source enters the inside of the machine, it is likely to cause the aging speed of the machine to accelerate, the performance to weaken, and easy to crash. . If it is necessary to clean the filling machine, the remaining products in the machine should be cleaned up, and then fill the barrel with a mild cleaning solution. It is recommended to use warm water, and if necessary, use soapy water, alcohol and other cleaning fluids.

　　2. Improper operation of the injection nozzle will lead to damage

　　If the injection nozzle overflows, press the safety emergency stop switch to ensure that the workshop is tidy. If the staff finds that the material is overflowing from the injection nozzle, they should press the safety emergency stop switch in time to avoid wasting materials. After the filling machine stops, take out the injection nozzle to check whether there is any damage, and replace the injection nozzle if damaged.

　　3. Improper operation of the cylinder of the filling machine will lead to machine failure or crash

　　When improper operation of the filling machine equipment causes the cylinder to be ejected and cannot be returned, do not press the safety button recklessly. When the cylinder of the machine is ejected and cannot be returned, the production should be suspended for 1-2 minutes to check whether the machine is faulty or dead. For example, when the machine breaks down during production, the staff presses the emergency stop switch. It may cause confusion inside the machine, and clearing all previous settings will delay production efficiency.

　　Three major maintenance methods for filling machine equipment:

　　1. The body of the filling machine brand is made of stainless steel. Please do not scrape its surface with sharp or hard objects.

　　2. When disassembling and washing the piston, remove the fixing screws at the same time, so as not to affect the process requirements of the other during disassembly.

　　3. The cylinder has been lubricated before leaving the factory, please do not open or add any lubricating oil.

　　Improper operation of the filling machine equipment will directly lead to damage to the filling machine equipment, which will not only cause machine failure, but also directly affect the production efficiency. Therefore, when operating the filling machine equipment, it is necessary to operate it correctly.