How to make good use of the automatic labeling machine? Many friends do not know much about the use of the labeling machine. In fact, for the operation of this type of machine, we only need to make some machine adjustments and remember the operation steps of the machine clearly. It is easy to use, so how to use the labeling machine well?

　　How to set up the automatic labeling machine:

　　1. The distance from the stripper plate to the bottle should be minimized.

　　2. The pre-mark distance should be reduced. Note that this will result in a variation in the style of the labeller, for example, pressure belt models require more pre-gauge than scraper models.

　　3. If PET backing paper/transparent surface material is used, it is necessary to use a label positioning sensor suitable for transparent materials, such as an ultrasonic sensor or a capacitive sensor.

　　4. When the label touches the surface of the bottle for the first time, it is necessary to apply pressure simultaneously to ensure that all the air under the label is expelled, thereby avoiding air bubbles and wrinkles.

　　5. In some cases, such as carton labeling, the online labeling machine uses brushes and low-density foam rollers to label. However, for pressure-sensitive label applications, such as film labels on glass/plastic/wine bottles, brushes and low-density foam rollers are not recommended because the labeling requirement at this time is to achieve a labeling surface that is free of air bubbles, wrinkled. These devices cannot exert sufficient pressure on the label surface and therefore cannot completely remove the air beneath the label.

　　6. Slowly apply sufficient pressure from the edge of the label to the back edge to ensure that the label is truly "fit".