GST automatic labeling machine manufacturers share the common troubleshooting methods of labeling machines! Understanding the common troubleshooting methods of labeling machines can allow us to improve work efficiency and save production equipment.

　　1. How to deal with no response when starting up

　　Confirm that there is no problem with the power cord, and confirm whether the fuse next to the input socket is in good condition. If it is burned out, please replace it. It is possible that the wiring inside the electric box is loose, please ask a professional to repair it. The relay may be damaged, replace the relay.

　　2. Processing method of labeling machine skewed label

　　The product is not placed correctly, replay the product. If the paper limit position is not adjusted properly, re-adjust it to ensure the accuracy of paper feeding. The support rod is not parallel to the axis of the bottle, and the bottle is deviated during the rotation process. Adjust the parallelism to ensure that the bottle rotates without offset.

　　3. The processing method of the label sticking to the active shaft

　　The glue is too thin. When the label passes through the driving shaft, the glue flows out to the driving shaft. If there is too much glue, adjust the interval between the squeegee block and the glue wheel.

　　4. How to deal with the unsmooth feeding of the labeling machine

　　The paper limit adjustment is too tight, re-adjust the limit block. The pick-up claws are stuck, clean the pick-up claws. Too many sheets are separated, adjust the gap between the separation roller and the separation platform.

　　5. The labeling machine motor keeps rotating

　　The target sensor detects abnormality and cannot recognize the label. It is necessary to observe whether the passing position of the label is detected by the target sensor. Or the sensor has been damaged, then you need to replace the new sensor. The speed of the motor separating the labels is too fast, and there is no gap between the labels, which interferes with the detection. We can adjust by reducing the speed of the motor.