Routine maintenance has always been a major part of the attention of users who use small paste filling machines, and small paste filling machines vary according to the level of technology, which leads to users' difficulty in using the equipment. At the same time, there is also a certain amount of communication in daily maintenance, so as to ensure that our equipment can exert the greatest benefits.

　　In fact, a very important part of the small paste filling machine is the feeding hopper of the filling machine. So when we buy a small paste filling machine, we must pay attention to a few points: the appearance materials of the small paste filling machine, the differences in the electrical appliances of the small paste filling machine, and the connection of various parts of the small paste filling machine The rationality of the design, the quality of the feed port of the small paste filling machine, etc.

       1. We should pay attention to the operating temperature of the small paste filling machine: the optimal temperature of the small paste filling machine should be -10 degrees to 50 degrees, and the relative humidity should not exceed 85%. There should be no corrosive gas, dust or explosive gas in the surrounding air during use.

　　2. The impurity filter of the small paste filling machine should be disassembled and washed frequently, and the body should be cleaned regularly with corresponding lotion products, and it should not be left unwashed for a long time, resulting in a lot of dirt.

　　3. Lubricating oil is very effective for the maintenance of small paste filling machines. After the small paste filling machine has been working continuously for 2-3 months, the back cover should be opened to add lubricating oil to the sliding parts and switch touch blocks, and lubricating oil should be added to the joints on the heating rod according to the situation. We must avoid The fuselage has been dry and rusted for a long time.

　　4. The small paste filling machine will inevitably move during use. When we move the small paste filling machine, we should pay attention not to place it on an angle or put it down, so as to keep the small paste filling machine stable.

　　5. Like all mechanical equipment, the small paste filling machine also has certain dangers. In the process of using the small paste filling machine, it is strictly forbidden to put our hands under the heating rod to avoid being scalded.