The automatic filling machine of the juice processing production line should be checked before use. Before starting to use, please make sure the charger's power plug is connected to a 380V power source and the chassis is grounded. Make sure the filling machine is properly air-pressed. Check motor and bearings for lubrication. It is strictly forbidden to run without oil, and the machine can only be started after it is normal. At the same time, observe whether there is a material chain plate on the conveyor belt of all liquid storage tanks, whether there are foreign objects on the conveyor belt, whether there is a bottle cap on the track of the storage cover, whether the water, electricity, and gas sources are connected, and whether there is a material chain for all liquid storage tanks. plate. Whether the fasteners are connected. If parts are loose, make sure all parts are running stably and wait patiently before using them normally.

　　Check whether the safety equipment of the automatic filling machine of the fruit juice processing production line is in normal operation. Check whether the valve of the reaction tank and the pipe of the filter unit are tightly connected, whether the filter cloth of the filter unit is damaged, and whether the cover is covered with fastening bolts to ensure that there is no leakage. packing pressure. Check all connection wires associated with the filling machine to ensure there are no broken skins, short circuits and other defects.

　　Before the automatic filling machine machine of the juice processing production line starts, whether there is water in all the water tanks, whether the chain plate is fixed, whether there are sundries on the conveyor belt, bottle cap, water source, connecting power supply, and main power supply, turn on the power indicator light and emergency stop again light. Press the start button on the control box, then press the start switch of the charging point, let the buzzer sound three times. After the warning is over, the whole machine starts to work and enters the fully automatic working mode of cleaning, rinsing and filling. When the machine stops, press the stop button on the charging position and the control box, and cut off the main power supply after stopping.

　　The air pressure of the automatic filling machine in the juice processing production line is unstable, and the filling power is driven by the cylinder. When the air pressure is unstable, it will have a great impact on the accuracy of the filling volume of the machine. The machine must ensure a stable air pressure source. Solution: By checking the pneumatic triple-type air pressure gauge on the machine, you can judge whether there is a problem with the air pressure. Because the air pressure is relatively high when the machine is started, the first inflation usually has a large error. In this case, it is not recommended to investigate the pneumatic Triptych.

　　The automatic filling machine of the fruit juice processing production line has air leakage. We all know that the filling part of the equipment needs to be sealed. If there is an air leakage, it will affect the filling accuracy. Solution: If the position where the re-feeding pipe and the filling machine encounter air bubbles occurs, it can be determined whether the machine is leaking. At this time, all joints need to be checked again to ensure that the sealing ring does not fail. Judging from the above one by one at the location of the leak, generally some joints of the pipeline will cause weld leaks, and attention should be paid to the inspection.

　　Automatic filling machine for fruit juice processing production line This equipment integrates cleaning, filling and capping, and is suitable for the filling production of various fruit juice drinks. After simple adjustment of some parts, the machine can also be used for the filling production of purified water and mineral water. Using isobaric filling technology, the filling is fast, stable and accurate, and the equipment is equipped with a complete backflow system to avoid secondary pollution and oxidation of beverages.