How to use the correct method to solve the common problems of the equipment in the process of use is the first task that modern production enterprises should prepare to overcome after they have the oral liquid automatic filling machine. The oral liquid automatic filling machine is mainly used for reasonable canned packaging for products with relatively small filling containers and relatively small filling volumes.

　　Therefore, you should pay extra attention during use, and don't act rashly when encountering problems, so as not to cause irreparable losses, and even affect the service life of the automatic oral liquid filling machine. In addition, GST will provide you with corresponding solutions to common problems of oral liquid automatic filling machines, hoping to bring convenience to your production operations.

　　1. What should I do if the cylinder piston of the oral liquid automatic filling machine does not move?

　　Confirm whether the safety emergency stop switch of the automatic filling machine is safe; confirm whether the air source switch of the automatic filling machine is turned on; confirm whether the one-way signal valve of the automatic filling machine is damaged.

　　2. What should I do if the cylinder piston of the oral liquid automatic filling machine does not return after being pushed to the top?

　　For such a phenomenon to occur, it is necessary to confirm whether the moving target of the oral liquid automatic filling machine is in contact with the one-way valve.

　　3. What should I do if the filling volume of the oral liquid automatic filling machine is inaccurate or if there is no output?

　　Confirm whether the throttle valve of the automatic oral liquid filling machine is closed; increase the pumping speed of the cylinder of the automatic oral liquid filling machine; confirm whether the three links of the automatic oral liquid filling machine are locked by clamps; Whether there is enough material in the storage box of the automatic filling machine; confirm whether the connection of the automatic filling machine for oral liquid is sealed.

　　4. How to deal with the material flowing out from the rear end of the material tank of the oral liquid automatic filling machine?

　　Check whether the sealing ring on the piston of the automatic filling machine is worn, and replace it if worn; confirm whether the piston and the piston rod of the automatic filling machine are fastened.