Centrifuge tubes are common consumables in the laboratory, but because of their commonness, there may be some habitual improper operations during use. Today, Guanshentai centrifuge tube automation production line equipment manufacturers share with you the precautions for the use of centrifuge tubes from both the centrifuge tube itself and the external use environment.

　　Note on the use of the centrifuge tube itself:

　　1. The centrifuge tube must be cleaned and dried before use. Even if you use a relatively high-end centrifuge tube brand, we recommend that you do a good job of cleaning before use. .

　　2. When using, the number of centrifuge tubes should be determined according to the type of centrifuge. If a centrifuge with double sleeves is used for a single test, another centrifuge tube must be filled with the same volume of liquid to maintain balance.

　　3. The centrifuge tube needs to be adapted to the centrifuge. According to the configuration of the centrifuge, use the appropriate length and thickness of centrifuge tubes.

　　4. After the centrifuge tube is put into the casing of the centrifuge for stratified separation, it should be stopped naturally when it stops rotating, and it must not be forced to stop by external force.

　　5. When using centrifuge tubes, do not use one tube multiple times.

　　6. The centrifuge tubes that are not used temporarily should be sealed well during the storage process.

　　Centrifuge tube use environment:

　　Most compliance labs are environmentally qualified, but we remind you that:

       1. When using the centrifuge tube for centrifugation in the experiment, do not place any substances on the centrifuge cover. After each use, be sure to clean the inner cavity and rotor.

　　2. If the high-speed microcentrifuge to be used has not been used for a long time, the centrifuge cover should be opened for a period of time before use to dry the inner cavity.