Guanshentai technology automation equipment manufacturers analyze and introduce why the pressure cosmetic filling machine does not produce material?

　　The possible reasons are as follows:

　　1. If it is a new product, consider the selection of the filling pump: whether the viscosity of the cosmetic material is too high, the one-way valve is not suitable for the liquid pump, and the rotary valve filling pump needs to be used for medium and high viscosity;

　　2. If it is a new product, consider the choice of filling method: sometimes the inlet of the high-viscosity material pump needs to use pressure-assisted feeding, such as creams and masks; or pre-melt by heating, and then use hot filling methods, such as lipstick;

　　3. There is air in the pipeline that has not been removed, which may lead to no feeding and discharging or inaccurate filling. It is necessary to use multiple fillings or use the emptying function (many machines have this function) to remove some materials before starting. filling;

　　4. If there was no problem with the old product before, but now there is a problem: from the barrel to the inlet of the filling pump, the filling pump, the filling pump to the filling nozzle, and the whole pipeline to check and find the problem: whether the barrel has entered Whether there is material in the pump (whether the suction is normal or not), whether there is material in the storage tank of the filling pump, whether there is material in the pipeline between the filling pump and the filling nozzle, and if the filling nozzle is open and closed, whether the opening and closing action is normal;

　　5. Filling speed: If the suction and discharge time is not enough during filling, it may also lead to no material. You can slow down the speed or fill in the manual debugging mode step by step to find the reason;

　　6. Check whether the lower pipeline is blocked;

　　7. Check whether the seals of the entire pipeline system are damaged or leaked;

　　8. Check whether the machine, pump, air pressure, control, etc. are normal.